92 T&C Starter

Discussion in 'General Motoring' started by Dan, May 16, 2005.

  1. Dan

    Dan Guest

    HTF do you change out a starter in this beast? Is it impossible to reach
    both bolts? Any tricks? Suggestions helpful
    Dan
     
    Dan, May 16, 2005
    #1
  2. Dan

    CaravanGuy Guest

    Use a flex to reach the bolts. There are only two. Must have good
    viewing room from underneath the vehicle. Good Luck! P.S. I've done
    two already, and they are not fun.....
     
    CaravanGuy, May 16, 2005
    #2
  3. Dan

    jdoe Guest

    They're really pretty easy. If you want you can remove the front engine
    restraint and it's a lot more visible but it can be done without this step.
    Larry
     
    jdoe, May 16, 2005
    #3
  4. Dan

    Dan Guest

    Thanks for the input - I should have mentioned it is a 3.3 engine.
     
    Dan, May 16, 2005
    #4
  5. Dan

    jdoe Guest

    YEah I know you wouldn't have a mitsu in a T&C.
    Larry
     
    jdoe, May 17, 2005
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Stalling/starter problem, no way related, right?

  2. Le Baron Starter - What Gives?

  3. 95 Cirrus Starter Problem

  4. Remote starter problem

  5. REMORE STARTER for 1997 LHS

  6. Need help on starter problem

  7. FA: starter, carb, and distributor 225/6

  8. 93 Voyager 3.0 Starter Newbie Questions

Loading...