'90 Sundance Headlight Assembly

Discussion in 'General Motoring' started by JohnKing, Nov 23, 2004.

  1. JohnKing

    JohnKing Guest

    How do pull the assembly to replace it
    I have found the two obvious points on the front but there
    seems to be a third I can't find.
     
    JohnKing, Nov 23, 2004
    #1
  2. JohnKing

    Daniel J. Stern Guest

    The "obvious points on the front" are the aiming screws, not meant to be
    used to remove the lamp. The lamp-and-bracket assembly bolts to the
    radiator support panel.
     
    Daniel J. Stern, Nov 23, 2004
    #2
  3. JohnKing

    Kirk Matheson Guest

    That is the correct way. Trying to remove the adjusting screws or the
    mounting clips while it is on the vehicle, will result in the mounting
    *ears* being broken. I know from experience.

    -Kirk Matheson
     
    Kirk Matheson, Nov 23, 2004
    #3
  4. JohnKing

    Marc Guest

    No kidding, ran into this on my '01 Durango. Didn't break anything but
    nearly did!
     
    Marc, Nov 24, 2004
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Master Brake Cylinder - '93 Plymouth Sundance

  2. 94 Sundance - wipers don't work

  3. Build Your Own Dump-Bed Assembly and Convert your Truck/Trailer to a Dump!

  4. wiper arm assembly

  5. 96 Chrysler T&C - Door Lock Assembly

  6. 2000 300M Headlight Assembly

  7. 2000 T&C Van / How to remove front cup holder assembly

Loading...