88 Daytona: No Reverse...

Discussion in 'General Motoring' started by Eden Smallwood, Aug 20, 2004.

  1. Eden Smallwood

    Eden Smallwood Guest

    A 1988 Dodge Daytona, Turbo 2.2L, with 5-speed manual trans...

    It won't go into reverse; I've removed the the knob, the pull-up
    ring, and the "console", (the ashtray, stick-boot, cassette box assembly...),
    and I'm manually performing the action that pulling up on the pull-up
    ring would do-- no go.

    My trouble is, not only does nothing happen, I can't see that it
    ever did anything at all-- it seems like a complete placebo. ??? In
    other words, I see no broken cable (or any cable) hanging off the bottom
    of the stick, no arm or lever or anything... So the problem is, I can't
    even figure out *how* pulling up on the pull-up ring *used to* allow me
    to "tell" the transmission that I wanted reverse.

    Is it clear? Help!! I can't fix it when I can't even figure out
    what needs fixing!

    Eden
     
    Eden Smallwood, Aug 20, 2004
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 93 caravan transmission: no reverse

  2. A604 Transmission - no reverse

  3. Popping noise on turns and reverse

  4. Town and Country blows fuse in reverse

  5. PT Cr. manual trans not going into reverse

  6. 92 Eagle Talon stalling in reverse

  7. outside rear view mirror tilting down in reverse

  8. ticking noise in reverse gear increases with speed in engine rpm

Loading...