3L V6 SOHC engine water pump replacement

Discussion in 'General Motoring' started by dan, Aug 3, 2008.

  1. dan

    dan Guest

    Engine, V6 3.0 L in a Plymouth Voyager

    I'm sure this has been discussed before but I would like to know what
    is the best tool/method to remove the small bracket that attached to
    the upper water pump and alternator mounting bracket(held by 3 X 12 mm
    bolts). I have no problem removing one 12 mm bolt attached to the
    water pump. But the other two 12mm seems very tight, I worry I'll
    round the head with an open ended wrench, is there any special tool.
    what other option do I have, like remove the alternator bracket as a
    whole etc. On the water pump, the top 10 mm bolt is behind the
    bracket, does it has to come off before removing the pump? Does the
    two part water pump come off as a whole unit or one part after the
    other? TIA

    Dan
     
    dan, Aug 3, 2008
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. '96 3.5L Water Pump/Engine Front Housing

  2. '96 SOHC: Engine stall under high speed and heavy acceleration.

  3. HELP: Water Pump Replacement on '95 Cirrus w/ 2.5L V6 ...

  4. MITSUBISHI DIAMANTE / SONATA ENGINE V6 3.0 SOHC - 6G72 for the Voyager Minivan?

  5. Fuel in Oil..2000 Dodge Neon, SOHC, in-tank fuel pump. Help!!

  6. Water Pump Replacement

  7. Car Running on Water - Is Water 4 Gas Scam?

  8. Caravan water pump replacement

Loading...