300M starting problem

Discussion in 'Chrysler 300' started by Mazza, Oct 28, 2003.

  1. Mazza

    Mazza Guest

    My '99 300M sometimes doesn't start until I move the gear out of Park into
    Neutral or move it back to Park. This has started recently but is now
    happening more frequently. It seems to be related to the transmission but
    I'm not sure. Has anyone else had this problem? Any ideas what's causing
    this?
    thanks
     
    Mazza, Oct 28, 2003
    #1
  2. Mazza

    Art Begun Guest

    DOes it fire but not start? Can you be more specific?
     
    Art Begun, Oct 28, 2003
    #2
  3. Mazza

    Mazza Guest

    It clicks but does not start. I'm thinking now that it may be a starter
    problem and moving the gears around is just coincidence. Your thoughts?
     
    Mazza, Oct 29, 2003
    #3
  4. Mazza

    StevJensen Guest

    "Mazza" wrote


    Likely a bad lockout switch on tranny. Keeps the thing from being
    started in gear.
    Or -- the shift detent is not aligned properly and the switch
    thinks that it is not in P or N. If the alignment is out,
    verify that the engine/tranny mounts are good.
     
    StevJensen, Oct 30, 2003
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 2000 - Chrysler 300m starting problems -40k miles.

  2. 93 Van 3.3 Starting problem

  3. 93 3.3 Starting problem

  4. Problem starting 1998 Neon

  5. 1996 Grand Caravan starting problem

  6. 1990 Lebaron Convertable, no lights, intermittent starting problem.

  7. 92 Chrysler Fifth Avenue Starting Problem

  8. 98 grand voyager intermittant starting problem

Loading...