3.0V6 codes 12 and 21

Discussion in 'General Motoring' started by Billccm, Dec 30, 2003.

  1. Billccm

    Billccm Guest

    Hello All:

    Well, it has been that kind of Holiday for me...EVERYTHING is breaking, and I
    am having a hard time keeping up. From my dryer to my plumbing to a broken
    irrigation pipe, everything is breaking!

    So, my LeBaron is not immune to this. My wife says the Check Engine light is
    on. I checked the codes: 12 and 21. The car is a 3.0V6 with 79K miles.
    Any advice?

    I looked and the codes are 02 sensor shorted, so what is recommended? Should I
    replace the 02 sensor, or consult a mechanic? I have heard that the 02 sensors
    seem to 'weld' themselves in place, so any advice on replacing these is
    appreciated!
    Happy New Year to all!
    Bill
    88 Lancer Shelby
    91 LeBaron Convertible
    01 Chevy Impala LS
     
    Billccm, Dec 30, 2003
    #1
  2. Billccm

    Rajsircar Guest

    Replace the O2 sensor. You will need to buy or rent a O2 sensor socket that has
    a slit on the side for the wires. Use pleanty of liquid wrench and make sure
    the engine is cold when you try to unscrew it. Don't use an impact wrench. If
    need be use a breaker bar with the socket, try to just nudge it a bit, spray
    liquid wrench and repeat.

    When you install the new part, make sure the threads have antiseize compound.
    Most new parts come with it, but chek. Do NOT overtighten.
     
    Rajsircar, Jan 1, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.