2015 Chrysler town and country potential Map issues???

Discussion in 'Other Models' started by davids1973, Apr 4, 2025 at 2:03 AM.

  1. davids1973

    davids1973

    Joined:
    Today
    Messages:
    1
    Likes Received:
    0
    I've been having P0172 p0175 issues with my T And C for about 18 month. I've recently replaced the complete timing chain and vvt system,170000 miles.

    I suspect im having a map sensor wiring or map issue. I've replaced the map sensor. The issue seems intermittent. You can drive between 2-3 hours before engine light comes on. From my understanding at 1300 rpms my map vacuum should be around 70-80 and I'm around 35.

    Any ideas, i have done a smoke test and no leaks were found. Do you think i could have a bad wire between the map sensor and ecm?
    Any suggestions are welcome
     
    davids1973, Apr 4, 2025 at 2:03 AM
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. '03 Town and Country ABS and Floor mat question.

  2. 96 Town & Country tranny fluid issues

  3. 2004 3.3 Town and Country. Engine runs rough and stalls after filling gas.

  4. 2015 Chrysler 300s AWD FOR SALE

  5. 2013 Chrysler Town and Country electrical issues

  6. 2015 Chrysler 200 V6 - Intermittent Hesitation/Intermittent stalling when stopped

  7. 2015 Chrysler 200 transmission id number

  8. 2015 Chrysler 200c V6 40,000 miles: eating batteries

Loading...