2003 Town & Country Seats

Discussion in 'General Motoring' started by marvinstockman, May 2, 2007.

  1. marvinstockman

    marvinstockman Guest

    I was able to add lumbar support to my driver's seat by removing the
    hard plastic seatback panel (2 screws), and inserting a rolled foam
    support between the foam of the seat and the vertical wire seat
    support. You'll see what you have to do as soon as you remove the
    plastic panel. For some reason, it was almost impossible to re-
    install the two seatback panel screws until I greased them.

    My back thanks me everyday.

    Good luck.

    Marvin Stockman
     
    marvinstockman, May 2, 2007
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Town & Country 2003 Transmission

  2. 2003 Town & Country Power Sliding Doors

  3. Front Brake pad replacement 2003 Town and Country TC

  4. 2003 Town & Country Radio question?

  5. Chrysler Town and Country front seats too tall.

  6. 2003 Chrysler Town & Country LX - Battery Dead

  7. Reset "Perform Service" 2003 Chrysler Town & Country

Loading...