2003 Grand Caravan - Stabilizer bushings

Discussion in 'General Motoring' started by ncs, Mar 4, 2007.

  1. ncs

    ncs Guest

    If I need to replace the stabilizer bushings (need to check out an
    occasional front end noise first) should I get them at the dealer or
    aftermarket (if available).

    thanks,
    nick
     
    ncs, Mar 4, 2007
    #1
  2. ncs

    jdoe Guest

    I like the NAPA ones better. I also like their end links (the top line ones)
    better than the oems
     
    jdoe, Mar 5, 2007
    #2
  3. ncs

    philthy Guest

    the urethane ones are the way to go but make sure you apply silglide to the bar and
    then install them they will hold up longer
     
    philthy, Mar 6, 2007
    #3
  4. ncs

    ncs Guest

    Thank you, do you know where I can get the silglide ? Is it a lubricant
    that I put on the bar where the bushings go ?
     
    ncs, Mar 7, 2007
    #4
  5. ncs

    ncs Guest

    One more question, the sway bar bushings look pretty easy to replace, I've
    done that before on a 1993 GV. Are the stabilizer bar link bushings
    relatively easy to replace also ?

    thanks again
    nick
     
    ncs, Mar 7, 2007
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.