2.5l Turbo Timing Positioning

Discussion in 'General Motoring' started by PhilipLowran, Sep 10, 2007.

  1. PhilipLowran

    PhilipLowran Guest

    Hi Everyone
    I have a Dodge Daytona with the 2.5 Turbo SOHC.
    I need to set the timing I just did a Head gasket and my chilton
    manual isnt showing me the positioning of the crank shaft. I know the
    middle 2 sprockets have arrows that have to point at each other and
    the cam shaft has a oval cut out that supposed to be pointing up.
    Can someone tell me the positioning or maybe find a picture online to
    show me this? for I have failed.
    Philip
     
    PhilipLowran, Sep 10, 2007
    #1
  2. PhilipLowran

    maxpower Guest

    Phil, when you set the timing belt, the intermediate shaft (that drives the
    distributor) has a mark such as this - that is supposed to line up with the
    other mark on the crankshaft (-) the cam has 2 arrows that are supposed to
    line up with the camshaft bearing caps (straight across) making sure the
    hole in the cam sprocket is straight up. If you line the cam marks with the
    hole down.......it will be 180 degrees out.

    Glenn Beasley
    Chrysler Tech
     
    maxpower, Sep 10, 2007
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 85 turbo - idle going crazy

  2. '86 Lancer 2.2L Turbo I--Sluggish from Stop

  3. Turbo Boost Gauge?

  4. 88 daytona with turbo+t-tops F/S +questions.

  5. 2.5 turbo 87 labaron won't start

  6. Hissing turbo Acclaim

  7. Turbo PT Oil recommendations

  8. 1991 Plymouth Acclaim 2.5 NON turbo. Cooling system ?'s

Loading...