1996 Voyager Transmission Filter

Discussion in 'Voyager' started by Inky, Dec 31, 2004.

  1. Inky

    Inky Guest

    I am replacing the filter in the automatic transmission of my 1996
    Plymouth Voyager 2.4L 4 Valve. I just want to be sure I have the
    correct filter before I proceed. The filter I removed is (sorta) arrow
    shaped, has the Chrysler logo on it, is held in place by two screws,
    and has a flat rubber gasket. The new filter (NAPA Part# 1-7960) is
    square, does not have any holes to allow for screws, and uses an
    O-ring.

    Let me know what you think. Thanks!

    -- Christian
     
    Inky, Dec 31, 2004
    #1
  2. Inky

    Daniel J. Stern Guest

    I think you have the wrong filter from NAPA.

    DS
     
    Daniel J. Stern, Dec 31, 2004
    #2
  3. Inky

    SN Guest

    They gave you the filter that fits the A604 4 speed electronic tranny by
    mistake. You need the ATP17466 filter kit (verify this to make sure).
     
    SN, Dec 31, 2004
    #3
  4. Inky

    Inky Guest

    Thanks, guys. Yeah, turned out to be the wrong one. Took it back for
    exchange. All back together now and shifting VERY smoothly.

    -- Christian
     
    Inky, Jan 1, 2005
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 1996 Dodge Caravan transmission

  2. 1996 Town and country transmission problem

  3. 1996 Voyager Transmission Hesitation

  4. 1990 Dodge Caravan Transmission Filter Change

  5. Location of VSS on Dodge Caravan 1996, 3.0, 3 Speed Transmission

  6. 1996 T&C Transmission HELP needed

  7. 1996 Chrysler Town & Country Transmission Problems

  8. 2006 Caravan Removed transmission pan, changed Filter

Loading...