1996-2000 3.0L belt juming problem fixed!

Discussion in 'General Motoring' started by javert, Dec 20, 2005.

  1. javert

    javert Guest

    If you have a 96-2000 chrysler minivan with the 3.0L engine with serpentine
    belt problems, then I have just the fix. The Goodyear 49204K belt kit.
    This kit fixes the serpentine belt problem once and for all.
     
    javert, Dec 20, 2005
    #1
  2. Is that in the gatorback series? We put a gatorback on our 94 chevy c1500
    4.3 v6 and it seemed to be a good replacement for the cracked one that was
    on it. Really is quiet too.

    Also would that be the same problem as our 92 Dynasty 3.3 where the belt
    would jump off every time it rained and we drove through a puddle?
     
    Daniel Armstrong, Dec 21, 2005
    #2
  3. javert

    javert Guest

    The gatorback line of belts is definetly a superior belt (noise wise as
    well as performance in wet conditions), however the belt offered in the
    fix kit for the 3.0L is not part of the Gatorback series. It is however a
    special (ribs on both sides) belt that will not fall of the pulleys once
    installed.
    As far as your 92 Dynasty with the 3.3L engine, Goodyear does not yet
    offer a field fix kit for that engine. Until they do, I would recommend
    that you use a Gatorback belt and ensure your belt tensioner is working
    properly. Also I would ensure that any splash shields that came with the
    vehicle are in place and working well.
     
    javert, Dec 21, 2005
    #3
  4. javert

    Adam Guest

    Like I said before, too bad your too late with a fix, Chrysler designed a
    fix TSB for older 3.0s already, it includes a shield being installed on the
    right side to keep out snow and rain, here is a quote from another message
    group reguarding the 'older' 3.0's, Just call the chrysler dealer and ask
    for service give them ur vin number and ask if the part numbers below apply
    to your vehicle.

    There is a TSB out to fix this problem and has been out for a long time. It
    involves installing a redesigned shield and retainers. TSB 07-03-94 Rev.A
    Quantity
    Part No.
    Description

    1

    **4673254**
    Shield

    2

    6030441
    Retainers

    1

    **6035135**
    Screw

    **AR
    4612829
    Belt, Serpentine Drive**
     
    Adam, Dec 21, 2005
    #4
  5. javert

    javert Guest

    The "snow shield" is a bandaid fix at best.
     
    javert, Dec 21, 2005
    #5
  6. javert

    Adam Guest

    I dont know, but for the older ones, it will have to work, unless that belt
    you use would work on the older 3.0s
     
    Adam, Dec 21, 2005
    #6
  7. javert

    Adam Guest

    Autozone sells a GY Gatorback for the older 3.0's, here is the info.

    BELT

    Normal Stock
    Special Order
    Not Available



    Item Part
    No.
    Warranty Core
    Value Unit
    Price Availability
    Store Web
    GATORBACK
    ALT & P/S 4060817 $31.99
     
    Adam, Dec 21, 2005
    #7
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.