1995 Jeep Grand Cherokee Won't Start

Discussion in 'General Motoring' started by jdurrmsu, Aug 8, 2005.

  1. jdurrmsu

    jdurrmsu Guest

    I have a 1995 Jeep Grand Cherokee Laredo that will not start. It will just
    keep turning over without firing. The fuel filter is new and the pump
    seems to be working fine. I tried to troubleshoot it by turning the key 3
    times and the check engine light flashed 3 times, then 2 times, then 5
    times, and then 5 times. From what I understand that relates to the EGR
    valve. Before I replaced the EGR valve I did some more tests on my Jeep
    and I have found that I am not getting a spark. I have tested the ignition
    coil and it is in working condition but I am not able to get a spark from
    the coil to the distributer. Where could my problem be?
     
    jdurrmsu, Aug 8, 2005
    #1
  2. jdurrmsu

    Steve Guest

    Check the crank position sensor.
     
    Steve, Aug 8, 2005
    #2
  3. jdurrmsu

    tim bur Guest

    cranksensor failed
     
    tim bur, Aug 9, 2005
    #3
  4. jdurrmsu

    jdurrmsu Guest

    Where is the crankshaft sensor located?
     
    jdurrmsu, Aug 11, 2005
    #4
  5. jdurrmsu

    jdurrmsu Guest

    Where is the crankshaft sensor located?
     
    jdurrmsu, Aug 12, 2005
    #5
  6. jdurrmsu

    jdurrmsu Guest

    Where is the crankshaft sensor located?
     
    jdurrmsu, Aug 12, 2005
    #6
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.