1994 Chrysler Concorde

Discussion in 'Concorde' started by hillstead, Nov 10, 2005.

  1. hillstead

    hillstead Guest

    When I Increase rpms on my car, it jerks me back in forth. Its really
    scary to drive on the highway. Like the brake light and gas light flash
    whenever this happens. For sure an electrical problem. Anyone have a
    similar problem?
     
    hillstead, Nov 10, 2005
    #1
  2. hillstead

    Joe Guest

    Wow! We had this exact same problem about a month ago on a 1994 3.5L, and it
    took a while to figure it out. The car ran perfectly below about 1500 rpm's.
    The dealer said the crank and cam sensors were getting out of sync, and the
    computer didn't know what to do. On my car, the cruise light flashed instead
    of the gas and brake lights. No codes were set. We checked a bunch of stuff,
    replaced both sensors, no change. Anyway, it turned out the problem was it
    jumped time.
     
    Joe, Nov 11, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 1994 Chrysler Acclaim Turning over but won't start

  2. TIP:1994 Chrysler New Yorker Headlamp Replacement

  3. 1994 Chrysler LHS Tranny question

  4. 1994 Chrysler Concorde> Won't shift out of second.

  5. 1994 Chrysler Concorde downshift problem.(air vacuum sensor?

  6. 1994 Chrysler AWD Minivan transmission removal

  7. 1994 Chysler Concorde Auto tranny in default 2nd gear

  8. 1994 Concorde transmission problem

Loading...