1990 Dodge Spirit PRND2L indicator cable

Discussion in 'General Motoring' started by kmatheson, Mar 27, 2005.

  1. kmatheson

    kmatheson Guest

    I had to remove the instrument cluster on this vehicle to try to fix
    the odometer reset button.

    After putting it back together, the PRND2L indicator is a little off.
    When I was reconnecting the cable to the column sleeve, there did not
    appear to be any way to make adjustments.

    The cable slides in the "V" notch, so that the pawl is on the back side
    of the notch. There is a clip that keeps the cable from coming out. I
    did not see anyplace to make an adjustment.

    Any other way that I can adjust this?

    Thanks,

    Kirk Matheson
     
    kmatheson, Mar 27, 2005
    #1
  2. kmatheson

    Daniel J. Stern Guest

    Means either you didn't clip the hook on the end into the correct slot on
    its tang, or the cable itself is misrouted.
     
    Daniel J. Stern, Mar 27, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 1990 Dodge Spirit 3.0 V-6 Emission Test Failure

  2. Gear Shift Indicator Cable Question

  3. Code 37 on 1990 Dodge Spirit with 3 Speed automatic

  4. 1990 Dodge Spirit

  5. How to replace a transmission in a 1990 Dodge Spirit 6 Cylinder car

  6. 1990 dodge spirit es turbo oil return hose leak

  7. cruise control indicator on Spirit

  8. Curt trailer hitch #12025

Loading...