03 T&C Service Tire System

Discussion in 'General Motoring' started by Zork, Jun 22, 2007.

  1. Zork

    Zork Guest

    Have been getting the message on my '03 T&C for the past few weeks
    of 'service tire system' on the computer readout. Have 'retrained'
    the sensors to no avail. Any suggestions, or do I have to go to the
    darn dealer ? ?
    Thanks, all.
    Zork
     
    Zork, Jun 22, 2007
    #1
  2. Zork

    who Guest

    Give the tires a few strong kicks.
     
    who, Jun 23, 2007
    #2
  3. Zork

    maxpower Guest

    Have you actually serviced them? did you check the tire pressure?

    Glenn Beasley
    Chrysler Tech
     
    maxpower, Jun 23, 2007
    #3
  4. Zork

    Zork Guest

    Yes.....all the tire pressures were set to the suggested pressures before
    the sensors were retrained.
    Actually, when I checked the pressures, none had to be changed, they were
    at the suggested pressure.
    Zork
     
    Zork, Jun 23, 2007
    #4
  5. Zork

    maxpower Guest

    One of the sensors is bad, a scan tool will be required to find out which
    one is faulty.

    Glenn
     
    maxpower, Jun 23, 2007
    #5
  6. Zork

    philthy Guest

    check the tire pressures with a high quality tire pressure gauge see if
    that hepls
     
    philthy, Jun 23, 2007
    #6
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.